Visit us at the "CBST 2009 - The 4th China International Beverage Exhibition on Science & Technology" on Nov. 24-26, 2009, Shanghai New International Exhibition Center,
Hall W2, Booth: 6F14.
Visit us at cannex Asia Pacific 2009, the world??s most professional metal packaging convention - June 8-10, 2009 in Guangzhou, China.
CanNeed Booth: 457
Visit us at PROPAK Asia 2009, professional packaging convention - June 17-20, 2009 in Bangkok, Thailand. CanNeed Booth: X16
You now position----Porduct----Can Making----2-piece Can Testing
Total number of pages: 1Page
1Page 13
| Front | Next | Not page
CMD-200 Can Measure Desk For Rear Stations
CMD-200 Can Measure Desk For Rear Stations is developed on basis of the long experience of Rear stations in 2 piece can product line.
CMD-200 Measure Flange width, Bottom depth, can height, Internal Diameter.
FMD-200 Can Measure Desk For Front Stations
FMD-200 Can Measure Desk For Front Stations is developed on basis of the long experience of Front Stations in 2 piece can product line.
FMD-200 Measure Topwall Thickness and Midwall Thickness, Bottom depth, can height, Internal Diameter.
AXL-4000 Axial Load Tester
The "canneed AXL-4000 Axial Load Tester" measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
AXL-CAL Calibration Cell For Axial Load Tester
AXL-CAL use to calibrate the AXL-4000 Axial Load Tester. Place the AXL-CAL into the testing platform and rise up gradually until reaches the top plate, then the AXL-CAL will display the real time pressure, compare the value that displaying on the AXL-4000 to make the calibration.
CTG-100 Coating Thickness Gauge
The Canneed's CTG-100 Coating Thickness Gauge provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans.
DER-3 Digital Enamel Rater
DER-3 Digital Enamel Rater is the industry standard. The new CANNEED Enamel Rater DER-3 instrument test the coverage of the enamel coating inside food and beverage cans. Also aerosol-cans may be tested with DER-3 Digital Enamel Rater. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
CBT-100 Buckle Tester Bottom for Can
The "Canneed CBT-100 Buckle Tester Bottom for Cans" determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses. The empty flanged can or straight wall can is placed in the holder. After covering the device with a plexiglass hood pressure is applied. The can is sealed with a rubber o-ring structure. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there "speed of pressure increase" may be set within the device. The test is terminated as soon as the can buckles. The maximum pressure value is shown in the display. Any can of varying diameter and height may be tested: inserts are available that can be exchanged within seconds.
CEBT-100 Buckle Tester for Can and End
The "Canneed CEBT-100 Buckle Tester for Can and end" determines the exact pressure at which the Can and End begins to buckle. With 4 Measuring mode: 1. Buckle Bottom For Can 2. Peak Test For Free End 3. Missile Test For Free End 4. Peak Test For Seamed End
FWG-100-d Flange width gauge(digital)
FWG-100-d Flange width gauge is designed to measure the flange width of open ended cans. The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined stainless steel for corrosion resistance and long life. The base plate is reversible to double the wear life of the surface. The FWG-d Flange width gauge is suited for round cans with diameters from 2" to 6.5".
CHG-d Digital Can Height Gauges
the Canneed "CHG-d Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. Constant measuring force for accurate, repeatable, user-independent results. With the Mitutoyo 0.01mm Resolution Digital Indicator. If you purchase the adapter and cable, the instrument can communicate with a computer. Option Calibration piece: 60mm;88.4mm;111.2mm;115.2mm;134mm;168mm; etc
BDG-100 Bottom depth Gauge
BDG-100 Bottom depth Gauge
IDG-100 Can Internal Diameter Gauge
IDG-100 Can Internal Diameter Gauge
WTG-100MH Wall Thickness Gauge
WTG-100MH Wall Thickness Gauge Measure Topwall Thickness and Midwall Thickness with this gauge for Trimmed 2-Piece Cans. Available for any Trimmed 2-Piece Cans of any height, the Wall Thickness Gauge measures topwall and midwall thickness. The digital dial indicators measure to 0,001 mm (0.00005) resolution.
Mitutoyo Standard SPC Data Output Easy to read digital display Requires little training and is extremely easy touse
If you're having trouble finding something, or if you need more information, please feel free to Contact Us Directly.
