Visit us at the "CBST 2009 - The 4th China International Beverage Exhibition on Science & Technology" on Nov. 24-26, 2009, Shanghai New International Exhibition Center,
Hall W2, Booth: 6F14.
Visit us at cannex Asia Pacific 2009, the world??s most professional metal packaging convention - June 8-10, 2009 in Guangzhou, China.
CanNeed Booth: 457
Visit us at PROPAK Asia 2009, professional packaging convention - June 17-20, 2009 in Bangkok, Thailand. CanNeed Booth: X16
You now position----Porduct----Can Making----3-piece Can Testing
Total number of pages: 1Page
1Page 19
| Front | Next | Not page
Seam Sight(TM) Full Automatic Seam Monitor
The Seam SightTM Full Automatic Seam Monitor is a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised by the computer. In less than 1 second the Seam SightTM software offers a measurement. The seam length, body hook, end hook, actual overlap, percentage overlap; seam gap, seam thickness and body hook butting% are measured. At the end of the measurement an evaluated seam appears including dimension lines and measured values. This may be stored in computer or printed out on a laserprinter. The values can be stored in a Excel file and are displayed in on-screen if values are within specs.
DER-3 Digital Enamel Rater
DER-3 Digital Enamel Rater is the industry standard. The new CANNEED Enamel Rater DER-3 instrument test the coverage of the enamel coating inside food and beverage cans. Also aerosol-cans may be tested with DER-3 Digital Enamel Rater. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
CTG-100 Coating Thickness Gauge
The Canneed's CTG-100 Coating Thickness Gauge provides a computer enhanced method of rapidly assessing lacquer film weight of both internal and external coatings on beverage and food cans.
CSS-300 Seam Saw
CanNeed "CSS-300 Seam saw" is a special seam circular saw with double cut for double seam inspections. The CSS 300 has specially designed for the irregular shaped cans, like rectangle cans, oval cans, etc. Also aerosol-cans can also be sawed with the saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. so that comes a very plain cut surface. The seam image on the Canneed series of Automatic Seam Monitors gets thereby very clear and improves measurement speed and reliability.
BDD-200 Bead Depth Gauge (Digital)
The "Canneed BDD-200 Bead Depth Gauge" is for measuring the bead depth of the can body.
BDD-200 has the fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy. The measuring data will shows on the indicator, operators can observe the data and figure out the bead depth.
CSS 200 seam saw
CanNeed "CSS-200 Seam saw" is a special seam circular saw with double cut for double seam inspections. The CSS 200 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on Caneed series Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
CSS-P2 Portable Seam Saw
CanNeed "CSS-P2 Portable seam saw" is a special seam circular saw with double cut for can double seam inspections. The CSS-P2 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve a very plain cut surface. The seam image on ˇ°VSM Automatic Seam Monitorˇ±, and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
VWM 3A Video Welding Line Monitor for Flange Width Fall
VWM 2A Video Welding Line Monitor for Flange Width Fall is use for measuring the welding line deviation size of 3 piece cans.
Please the sample on the testing base, the CCD camera will quickly focus, then the welding line image will be display on the screen, use the VMM Measuring Software to measure the welding line deviation size, and save the image and measurement results, so that convenient for the communication on quality control.
ZM570-D Digital Body Blank Gauge
Canneed "ZM570-D Digital Body Blank Gauge" These units are made for the quality control of can body blanks. 1. Precision gauge for measurement of body blanks with the help of a incremental ruler/ fine measuring gauge combination and a digital dial indicator for the angle measurement; 2. Constant measuring force for accurate, repeatable, user-independent results 3. Sequential measurement of blank height, blank width and squareness
CLT-100 Leak Tester for can
The canneed "CLT-100 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed by magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. Test pressure 8 - 10 bar. The test procedure is performed semi-automatically. The tester is suitable for round 3-piece cans of max. can diameter of 130 mm. The maximum can height is 300 mm.
CLT-600 Leak Tester for can
The canneed"CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible. A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly. The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water. The whole test cycle is automated and is pneumatically controlled by pressure regulator valves.
AXL-10000 Axial Load Tester
The"Canneed AXL-10000 Axial Load Tester" measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
FWG-d Flange width gauge
FWG-100-d, FWG-200-d, FWG-300-d Flange width gauge Canneed FWG-d Flange width gauge is designed to measure the flange width of open ended cans. The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined for corrosion resistance and long life. The base plate is stainless steel to extend the wear life of the surface. With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer.
IDG-200 Can Internal Diameter Gauge
IDG-200 Can Internal Diameter Gauge
CHG-300 Digital Can Height Gauges
The "CHG-d Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. Constant measuring force for accurate, repeatable, user-independent results. With the Mitutoyo 0.01mm Resolution Digital Indicator. If you purchase the adapter and cable, the instrument can communicate with a computer.
WWP-100 welding line gibbous press tester
WWP-100 welding line gibbous press tester
WWT-100 welding line outstretched tester
The CanNeed "WWT-100 Welding line outstretched tester" is used to test the welding integrality of the flange point. How to test: Place a sample can body on the corresponding plug, handle piston valve. And the cylinder drives the board to press the can body. Stop when the flange os curled about 10 mm. Then loosen the piston valve, take the can body out to check if there is any breaches. Mark down the result.
PDG-d Plane depth Gauge (Digital)
The "PDG-d Plane depth Gauge (Digital)" is for measuring the bottom end depth of the cans. The measuring base would be subject to the sample size, so please indicated the end size when purchasing. To connect the PDG-d with the adapter and cable, all the measurement data can be transferred to the computer or SPC system, so that to avoid recording the data manually. The "PDG-d Plane depth Gauge (Digital)" consists of Plane depth Gauge and calibration base.
CSM-208, CSM-207 Can Seam Micrometers (Fine tuning)
CanNeed CSM series Can Seam Micrometers are use for measuring the seam thickness and length. The fine tuning function helps to avoid the deviation caused by over rotation. CSM-208 is applicable to measure the seam thickness and length of flat bottom straight wall cans. CSM-207 is applicable to measure the seam thickness and length of aerosol cans and necked-in cans.
If you're having trouble finding something, or if you need more information, please feel free to Contact Us Directly.
