Visit us at the "CBST 2009 - The 4th China International Beverage Exhibition on Science & Technology" on Nov. 24-26, 2009, Shanghai New International Exhibition Center,
Hall W2, Booth: 6F14.
Visit us at cannex Asia Pacific 2009, the world??s most professional metal packaging convention - June 8-10, 2009 in Guangzhou, China.
CanNeed Booth: 457
Visit us at PROPAK Asia 2009, professional packaging convention - June 17-20, 2009 in Bangkok, Thailand. CanNeed Booth: X16
You now position----Porduct----Food and Beverage
Total number of pages: 1Page
1Page 30
| Front | Next | Not page
CanNeed CAN-125B Pasteurization Temperature Monitor (F0 Value)
CanNeed CAN-125B Pasteurization Temperature Monitor (F0 Value) has been chosen by many beverage and canned food factories.
- Convenience and durable CanNeed CAN-125B Pasteurization Temperature Monitor (F0 Value) is portable and it was a stainless steel weldless one-piece design, which ensured its excellent sealability and long service life.
- Powerful function CAN-125B Pasteurization Temperature Monitor (F0 Value), record and store all temperature data of the pasteurization process, the inside and outside temperature curve of samples and runtime. Users can define the sampling frequency of the monitoring. The powerful professional software CND-LogSee can print the report and curves.
Seam Sight(TM) Full Automatic Seam Monitor
The Seam SightTM Full Automatic Seam Monitor is a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised by the computer. In less than 1 second the Seam SightTM software offers a measurement. The seam length, body hook, end hook, actual overlap, percentage overlap; seam gap, seam thickness and body hook butting% are measured. At the end of the measurement an evaluated seam appears including dimension lines and measured values. This may be stored in computer or printed out on a laserprinter. The values can be stored in a Excel file and are displayed in on-screen if values are within specs.
CAN-85B Pasteurization Temperature Monitor
Pasteurization Temperature Monitor for Beer and Beverage.
Attributes 1. High accuracy 2. Temperature data logger with 2 sensor, 1 for sample, 1 for spray water 3. Readout via Interface CAN-TR and Processor CAN-200P, independent of pc 4. Can also Readout via Interface CAN-TR and PC 5. Programming via PC 6. Powerful software CND-LogSee 7. Completely waterproof 8. Stainless steel housin 9. Temperature resistant up to 85 degree C 10. Factory calibration certificate
CSS-300 Seam Saw
CanNeed "CSS-300 Seam saw" is a special seam circular saw with double cut for double seam inspections. The CSS 300 has specially designed for the irregular shaped cans, like rectangle cans, oval cans, etc. Also aerosol-cans can also be sawed with the saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. so that comes a very plain cut surface. The seam image on the Canneed series of Automatic Seam Monitors gets thereby very clear and improves measurement speed and reliability.
KZJ-AS-200d Digital AutoShaker Beverage CO2 Calculator
The "KZJ-AS-200d Digital AutoShaker Beverage Co2 Calculator " calculates the carbon dioxide content in the filled drink in glass/PET bottles and cans. The simple operation which guarantees high reproducibility have led to its becoming a significant element of Quality Assurance in the drinks industry.
Attributes 1) Rotate by motor, avoid shaking by hand, guarantees high reproducibility 2) With protection drum, more safety 3) The CO2 content is calculated automatically and digitally displayed. 4) Measurement just need 3 minutes 5) Simple operation 6) Available for most common glass bottle PET bottle and cans.
KZJ-AS-100 AutoShaker Beverage CO2 Meter
The "KZJ-AS-100 AutoShaker Beverage CO2 Meter " calculates the carbon dioxide content in the filled drink in glass/PET bottles and cans. The simple operation which guarantees high reproducibility have led to its becoming a significant element of Quality Assurance in the drinks industry.
Attributes 1) Rotate by motor, avoid shaking by hand, guarantees high reproducibility 2) With protection drum, more safety 3) Measurement just need 3 minutes 4) Simple operation 5) Available for most common glass bottle PET bottle and cans.
KZJ-DGM-100 Digital Beverage CO2 Calculator
KZJ-DGM-100 Digital Beverage CO2 Calculator
The portable Digital CO2 Gehaltemeter, type KZJ-DGM-100, enables a fast and accurate determination of the CO2 content in beer and carbonated drinks, either directly sampled within the production process (from e.g. tanks, pipes) of thereafter (from e.g. kegs).
KZJ-GMT-100 Beverage CO2 Meter
KZJ-GMT-100 Beverage CO2 Meter
The portable Beverage CO2 Meter, type KZJ-GMT-100, enables a fast and accurate determination of the CO2 content in beer and carbonated drinks, either directly sampled within the production process (from e.g. tanks, pipes) of thereafter (from e.g. kegs).
KZJ-SST-2 Secure seal tester
The "canneed KZJ-SST-2 Secure Seal Tester" is used to test seal integrity on the glass or plastic containers and cans. The KZJ-SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The KZJ-SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
KZJ-BCC-200 BEVERAGE CO2 CALCULATOR
KZJ-BCC-200 BEVERAGE CO2 CALCULATOR is used to measure the CO2 content in carbonated beverages filled in glass and PET bottles and cans.
DER-3 Digital Enamel Rater
DER-3 Digital Enamel Rater is the industry standard. The new CANNEED Enamel Rater DER-3 instrument test the coverage of the enamel coating inside food and beverage cans. Also aerosol-cans may be tested with DER-3 Digital Enamel Rater. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
CSS 200 seam saw
CANNEED CSS 200 seam saw is a special seam circular saw with double cut for can double seam inspections. The CSS 200 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw.
CLT-600 Leak Tester for can
The canneed"CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible. A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly. The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water. The whole test cycle is automated and is pneumatically controlled by pressure regulator valves.
CLT-100 Leak Tester for can
The canneed "CLT-100 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed by magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. Test pressure 8 - 10 bar. The test procedure is performed semi-automatically. The tester is suitable for round 3-piece cans of max. can diameter of 130 mm. The maximum can height is 300 mm.
7001 Pressure tester
The "CanNeed Model 7001 CO2 tester and Pressure Tester" is used to test carbonated beverages for volumes of CO2 gas in glass/PET bottles and cans. This instrument uses a pressure gauge (0-0.4Mpa or 0.6Mpa) It is available in one and two litre sizes. The sample is lifted easy to be pierced. The 7001 CO2 tester will provide rapid and accurate determination of CO2 gas volumes in alcoholic and non-alcoholic beverages when used with the two pressure/temperature relationship charts furnished with this instrument.
KZJ-5001 CO2 Tester and Pressure Tester
The "CanNeed KZJ-5001 CO2 tester and Pressure Tester" is used to measure the CO2 content in carbonated beverages filled in glass and PET bottles and cans.
KZJ-5000 Air Meter
The "CanNeed KZJ-5000 Air Meter " is used to measure total air content in carbonated beverages filled in glass and PET bottles and cans. And the air content in the headspace volume. This instrument is recommended for testing air content where greater speed and accuracy is required. It is automatically adjustable to various size bottles and cans.
KZJ-Inpack 3000 CO2 Meter
The "CanNeed Model KZJ-Inpack 3000 CO2 Meter " is used to measure the CO2 content in carbonated beverages filled in glass and PET bottles and cans.
KZJ-BT Autotumbler
The "KZJ-BT Autotumbler" is use for shaking up the bottled or canned samples. Set the shaking time, then clamp the samples into the clamp, start the equipment, samples will be shook and tumbled automatically until reaches the set time.
KZJ-EBC Colorimeter (Colordisc model)
The "KZJ-EBC Colorimeter" adopted the Germany original AVM colordisc and in conformity with the EBC standards.
Use the 4800K color temperature light source, extremely alike the light condition of the sunny whether in high latitude area, which is the best condition on the accuracy for testing the beer or malt juice. Equip with the parts of observing window, which allow the operators to compare the color between the beer and colordisc.
KZJ-GCD Gauge Calibration Device
The "KZJ-GCD Gauge Calibration Device" a dedicated precision instrument for calibrating pressure gauges and digital pressure sensors. It is a universal applicable device for all kinds of pressure calibrations. As the CO2 content determination depends on the measurement of both the equilibrium pressure and the temperature, an accurate and reliable measurement of the pressure is essential, to avoid errors in the measurement of the CO2 content.
MB-8A Auto Mashing Device
The "MB-8A Auto Mashing Device" was developed by CanNeed and K&J company, it is the best choice for beer and malt Laboratory.
Attributes: 1. 8 orifices 2. LCD monitor, display the real time temperature and time, can switch to display the temperature curve. 3. Program controlled, accurately controls the temperature. 4. Mashing cup make from the thick wall stainless steel, smooth and weldless. 5. Inside material also stainless steel 6. Water sink cover is make from polishing stainless steel 7. During the mashing process, all temperature and time parameter to be displayed on the screen.
KZJ-RY-002 Autoshaker
The "KZJ-RY-002 Bitterness Shaker" is use for shaking up the samples, especially for the extraction testing. Put the sample into the conical flask, then clamp the conical flask to the clamps, set the shaking time and frequency and start the shaking. The device adopted a 20mm reciprocating shaking way, which ensured the sample is fully mixed.
KZJ-ISD-3000 Piercing Sampling Device
The "KZJ-ISD-3000 Piercing Sampling Device" is for sampling from the bottled or canned products. Place the beverage onto the base, press down the handle and the piercing will be done. Extend the piercing needle into the bottom of samples, under the pressure from the CO2 outside, the liquid will flow into the measuring instrument.
L-100 CO2 Purity Tester
The Canneed "L-100 CO2 Purity Tester" consists of a caustic reservoir and calibrated absorption burette mounted to a PVC polished frame. The reservoir and burette are held to the frame with two neoprene covered mounting bands that are adjustable from the rear side of the frame. The absorption burettes are available in five different calibrations, with the standard burette graduated in tenths of one percent, the total being one percent of the volume of the burette. The caustic reservoir has a line indicating the level to which caustic solution should be added, which volume is slightly in excess of the capacity of the absorption burette.
CVG-200 Canners Vacuum Gauge
the Canneed "CVG-100 and CVG-200 Canner's Vacuum Gauge", Used to measure the vacuum pressure of seamed cans. The gauge is placed on top of the can and the piercing needle is forced through the top of the can. The rubber collar forms a temporary seal to allow for measurement.
CVG-100 is designed for using near the product line, Consists of a 0 to 76cm Hg vacuum gauge, pierce point, and rubber collar. Also available with dual scale to measure pressure to 15 psi.
CVG-200 is designed for using in lab, Consists of a holder, a 0 to 76cm Hg vacuum gauge, pierce point, and rubber collar. Also available with dual scale to measure pressure to 15 psi.
CVG-100 Canners Vacuum Gauge
the Canneed "CVG-100 and CVG-200 Canner's Vacuum Gauge", Used to measure the vacuum pressure of seamed cans. The gauge is placed on top of the can and the piercing needle is forced through the top of the can. The rubber collar forms a temporary seal to allow for measurement.
CSM-208, CSM-207 Can Seam Micrometers (Fine tuning)
CanNeed CSM series Can Seam Micrometers are use for measuring the seam thickness and length. The fine tuning function helps to avoid the deviation caused by over rotation. CSM-208 is applicable to measure the seam thickness and length of flat bottom straight wall cans. CSM-207 is applicable to measure the seam thickness and length of aerosol cans and necked-in cans.
SCO Sanitary Can Opener
SCO Sanitary Can Opener
NIPPER
NIPPER
If you're having trouble finding something, or if you need more information, please feel free to Contact Us Directly.
