CanNeed-ACBT-1100 is a full automatic buckle tester bottom for cans with unattended operation. It used to test the maximum pressure before can bottom starts to deform, and with dome growth function. CanNeed-ACBT-1100 is a standard instrument for can-making industry to achieve continuous and efficient automatic detection.

CanNeed-ACBT-1100 is equipped with auto sampling device which conveys the can to the testing area automatically. Swinging mechanical hand pushes the can to the testing station and it will measure and sort unqualified products automatically. It is also equipped with unqualified products samples retention channel, to facilitate users to analyze unqualified products.

Automatic Seam Monitor（Automatic Cutting and Measurement）Equipped with Golden Lens® video capture device which interference-free of external light source and ensured the high image definition.

CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.

CanNeed-CMT-300 Mobility / Lubricity Tester for Cans is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.

Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.

CanNeed-FMS-2000 Automatic Front End Measure System is used to measure Bottom Depth, Can Height & Topwall and Midwall Thickness of 2-pc can. It’s designed based on practical experience and applied for back end inspection. It can be used to test different sizes of cans, and there is no need to replace clamps.
Adopt standard calibration gauge, imported micrometer, and touch screen PLC control & display.

The CanNeed Seam Sight® Full Automatic Seam Monitor has adopted the advanced optical system and Golden Lens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The Seam Sight® system is equipped with the new seam measuring software Seam Sight® .

CanNeed-RDG-100 Reform Dome Gauge is used to measure the internal diameter(G) on the reform dome.

Such as 200, 202, 206, 209. Measuring dome integer inner diameter

Equipped with the Mitutoyo 0.01mm resolution digital indicator.

If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.

CanNeed-AAXL-1100 is a full automatic can axial load measure system with unattended operation. It can measure the axial load of the 2-piece can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.

There is no need to replace the clamp when measuring necked-in cans and straight wall cans. CanNeed-CBT-400 can measure the cans with different diameters and heights.

Put the sample cans into the measuring station directly. There is no need to press the cans. It will automatically clamp and seal the cans by the cylinder and auto sealing device. When the operators press “TEST”, it will collect the buckle values of the cans.

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.

CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.

CanNeed-ACTG-2000 is a fully Automatic Optical Coating Thickness Gauge with unattended mode, it adopts non-contact optical measurement technology to measure the thickness and weight of dry film. It is a standard equipment in the canmaking industry to realize the continuous and efficient automatic inspection on the sample cans.

Compatible with straight-wall cans and finished cans. No changing parts are required for different can sizes in can heights and diameters.

CanNeed-ACBT-1000 is a full automatic buckle tester for can bottom with unattended operation.It determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses with dome growth function.

The machine adopted fully automatic inspecting technology, more efficient and more effectively reducing the human errors. It is the standard for evaluating can quality in can-making industry.

Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.

Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.

CanNeed-CHG-200 Digital Can Height Gauge can quick measure the heights of cans, applicable for 2-pc cans, 3-pc cans and aerosol cans.

If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.