|
| |
Product Classification : Canned Beer/Drinks
|
|
CanNeed-CAN-5001 CO2 Tester and Pressure Tester
|
|
The CanNeed-CAN-5001, CAN-5002 CO2 tester and Pressure Tester are for measuring the CO2 content in carbonated beverages filled in glass and PET bottles or cans. It is designed according to ASBC Theory of American Society of Brewing Chemists, corresponding to “GB/T 4928 – 2001 Brewing Analysis Methods” and “GB/T 10792 – 1995 Carbonated Beverage Analysis Methods”. Therefore, the machine is widely used by Quality and Technical Supervision Bureau and beverage enterprises.
|
|
|
CanNeed-DHG-300 Digital Can Height Gauge
|
|
The "DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
PTT-300 POP & TEAR TESTER
|
|
The CanNeed "PTT-300 Pop & Tear Tester" was developed for testing different kinds of easy open ends.
Applicable to 7 different types of ends: RP / SOT / EO / OVAL / FSE / SNAP and ALUFIX.
Adopted 5 different testing modes: RP / SOT / EO / OVAL and SNAP.
Operators just need to hook the ring and press "test" button, then the PTT-300 will do the test automatically. During the testing process, the microprocessor will monitor and record the max. Pop and Tear force. With different sizes of the clamps, it is able to test different sizes of ends.
|
|
|
CanNeed-FWG-100-d CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge (digital)
|
|
The “CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge” is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurementaccurately. Auto aligning the center of can body, applicable for different types of cans.
If purchased the adapter and cable, the gauges can be connected to a computer or SPC system for data collection, avoiding the manual recording and personal error.
|
|
|
CanNeed-IDG-100/200/300 Can Internal Diameter Gauge
|
The “CanNeed-IDG-100 Internal Diameter of Can” is used to measure the internal diameter of small cans, such as 200, 202, 206, 209.
The “CanNeed-IDG-200 Internal Diameter of Can” is used to measure the internal diameter of larger cans. According to clients’ request, CanNeed-IDG-200 can be made to measure 2 to 3 different sizes of cans at the most at the same time. Note: The difference between the internal diameters of the two cans must be over 10mm.
When placing the order, please indicate the internal diameters of the cans, such as 202 neck-in cans, 206 neck-in cans.
With the Mitutoyo 0.01mm resolution digital indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
CDS-10 Can dissect saw
|
Give up the old method for dissecting cans, to observe the can interior has become so easy and clear.
The “CDS-10 Can Dissect Saw” was specially designed to cut the can body into two axially, so that to observe the situation of corrosion or lacquer scale off.
|
|
|
AXL-4000 Axial Load Tester
|
|
The “CanNeed AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
|
|
|
PDG-d Plane depth Gauge for Canned Food and Beverage
|
|
The “PDG-d Plane depth Gauge (Digital)” is for measuring the bottom end depth of the cans. The measuring base would be subject to the sample size, so please indicated the end size when purchasing.
|
|
|
CanNeed-SM-24 Electric Belt Drive Seamer
|
Canneed “SM- 24 Electric Belt Drive Seamer” (Desktop model) enables the users to do more lab tests. Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring.
It is much more convenient for those lab tests, fast, easy and high efficiency
|
|
|
CanNeed-CLT-600 Leak Tester for can
|
|
CanNeed-CLT-600 Leak Tester for can is used for checking the leakage of 3-pc can XE "3-piece can" s in a water bath. It can test six cans in each test.
|
|
|
STG-200-d Seam Thickness Gauge(digital)
|
the STG-200-d Seam thickness gauge can be used to measure Seam thickness.
With measure angle compensation. The center mesure point can be adjusted.
Cans can be auto- positoned in the center easily during measuring .
With the Mitutoyo 0.01mm Resolution Digital Indicator.
If you purchase the adapter and cable, the instrument can communicate with a computer.
|
|
|
NIPPER
|
|
A convenient, all-purpose hand tool used for hand teardown of can seams. Vinyl coated hand grips, jaw width is 1”, overall length is 6”
|
|
|
CanNeed-CAN-125B Pasteurization Temperature Monitor (PU Monitor)
|
|
CanNeed-CAN-125B Pasteurization Temperature Monitor is used to measure the temperature in bottles or cans ,also water temperature during sterilizing process,caculate Pu value,and temperature curve can display on PC or print out with a printer.
CanNeed-CAN-125B PU Monitor record and store the temperature data of the whole sterilizing process,caculate the total PU value,king PU value(PU value that obtained when temperature is above 60℃), max.wine temperature,max.water temperature,runtime and the runtime of the two max.temperature.Users can define the sampling frequency of the monitoring.The powerful professional software CND-LogSee can print the report and curve,save data as excel files and transfter the data to those computers which have not installed the CND-LogSee software.
|
|
|
CIC
|
|
CIC
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
