CanNeed-CTG-310 Coating Thickness Gauge is used to test the coating thickness(coating weight per unit area, g/m2). When equipped with “Hover Probe”, it can measure the coating thickness of plate sheets. When equipped with can body testing clamp, it can test the coating thickness of can body.

Use standard coating plate (sample with known weight, g/m2) calibration equipment to test different

types of coatings. Test result and coating type number will display on the screen and the data will be output to PC with RS232.

CanNeed-ECW-d End Curl Width Gauge is for measuring the end curl width of the can ends. It is applicable for both round end and square ends. Use the prod contactor to measure the end curl width,optional for 2.72 mm or 3.07mm (customize by order). It can also measure the end curl height.

Equipped with the Mitutoyo 0.01mm resolution digital indicator. If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.

The CanNeed-RDM-100 Radial Dimensions Measure Desk For Claw Twist Cap is developed based on the long-term practical experience. It is applied to measure the radial dimensions of claw twist cap: cover outer diameter, cover inside diameter, claw diameter, claw width.
Configure with Mitutoyo digital display.
If purchased the adapter and cable, the instrument can be connected to a computer or SPC system for data collection.

Equipped with the Mitutoyo0.01mmResolution Digital Indicator.

If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.

CanNeed-LSS-100 Low Speed Saw" is for cutting the End rivet to observe and evaluate the rivet profile images of Ends.

The end is cut through the rivet by the CanNeed-LSS-100 Low Speed Saw and then placed onto the testing platform of "VRM-4CVideo Rivet Monitor”. The rivet profile images display on the screen. Use the “VRM Measuring Software” to measure the rivet quality. It is able to save and print the rivet profile images and data, convenient for the communication of Production Department or can making plants.

"CanNeed-TRK-300 Oven Temperature Tracker” is use to pass through the oven with the solidifying products, and record down the real temperature during the process. The logger is in the centre of the system. Heat insulation case is for protecting the logger from over heat by the oven. When passing through the oven, the CanNeed-TRK-300 Oven Temperature Tracker will record down the real time temperature of the solidifying products through the 5 thermocouples which were connected to the products, and one thermocouple is for recording the air temperature of the oven. After the recording process was finished, use the CND_TRK Software to analyze the temperature data and generate the detail reports.

CanNeed-VRM-4C Video Rivet monitor is a Video camera system to observe and evaluate the rivet profile images of ends for rivet quality control. Any end of varying diameter may be tested.

Use the CanNeed-LSS-100 Low Speed Saw to cut the ends through the rivet position, place the cut end on the measuring support and adjust the camera to focus to the rivet position, the rivet profile image will show on the monitor.

With the VRM professional software, it is able to measure the rivet parameters on-screen. The measurement data and rivet images can be store or print out, make it more convenience for communicating with the production department or manufacturers.

CanNeed-TDE-100 Sterilization Thermograph (Can FO Value Tester) Suitable for all kinds of sterilization apparatus and occasions for recording temperature: retorts, spray sterilizing machines, sink type sterilizer, warehouse and trucks.

The user properly connects CanNeed-TDE-100-C** Sterilization Thermograph with the test samples, and places them together in the sterilizing equipment for sterilization. CanNeed-TDE-100-C** will record the temperature curve during the whole process of the sterilization. When the sterilization ends, the thermograph will be put on CanNeed-TDET-100 “Electromagnetic Induction” Data Transmitter and the temperature data will be output to the computer. With the assistance of the software, the temperature data and curve can be read, analyzed, saved and printed.

CanNeed-CAN-F-125 Sterilization Temperature Monitor (F0 Value Monitor) has been chosen by many
beverage and canned food factories.

Applicable to different kinds of sterilization equipments and different place that require temperature monitoring: sterilization kettle (autoclave), Spray sterilization machine, Water sink sterilization machine, warehouse, transportation vehicles, etc.

Applicable to different kinds of products: canned food, beverage, beer, pouch food, jelly, etc.
Applicable to different kinds of packaging: metal cans, glass or PET bottles, pouches, plastic boxes, etc.

CanNeed-TRK-6000 Oven Temperature Tracker is use to pass through the oven with the solidifying products, and record down the real temperature during the process. The logger is in the centre of the system. Heat insulation case is for protecting the logger from over heat by the oven. When passing through the oven, the CanNeed-TRK-600 Oven Temperature Tracker will record down the real time temperature of the solidifying products through the 5 thermocouples which were connected to the products, and one thermocouple is for recording the air temperature of the oven. After the recording process was finished, use the CND_TRK Software to analyze the temperature data and generate the detail reports.

CanNeed-CAN-125B Pasteurization Temperature Monitor is used to measure the temperature in bottles or cans ,also water temperature during sterilizing process,caculate Pu value,and temperature curve can display on PC or print out with a printer.

CanNeed-CAN-125B PU Monitor record and store the temperature data of the whole sterilizing process,caculate the total PU value,king PU value(PU value that obtained when temperature is above 60℃), max.wine temperature,max.water temperature,runtime and the runtime of the two max.temperature.Users can define the sampling frequency of the monitoring.The powerful professional software CND-LogSee can print the report and curve,save data as excel files and transfter the data to those computers which have not installed the CND-LogSee software.

The “CanNeed-TRK-300 Oven Temperature Tracker” is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.

"CanNeed-TRK-300 Oven Temperature Tracker” is use to pass through the oven with the solidifying products, and record down the real temperature during the process. The logger is in the centre of the system. Heat insulation case is for protecting the logger from over heat by the oven. When passing through the oven, the CanNeed-TRK-300 Oven Temperature Tracker will record down the real time temperature of the solidifying products through the 5 thermocouples which were connected to the products, and one thermocouple is for recording the air temperature of the oven. After the recording process was finished, use the CND_TRK Software to analyze the temperature data and generate the detail reports.

SeamSight-VSM-6A Automatic Seam Monitor is a compact measuring system for quick and accurate automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy.

SeamSight-VSM-6A Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.