CanNeed-TLT-200 Top Load Tester can measure the top load force, top load deformation, bottle body plane force and side force strength, the test result can be considered as the reference for product improvement and quality control. The tester is convenient operation and easy maintenance.

Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.

Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.

The CanNeed-PPG-100 Preform Perpendicularity Gauge is used to test the perpendicularity of PET bottle.

It is the standard equipment for PET bottle industry and beverage industry.

Unlike other instruments, CanNeed-PPG-100 can effectively avoid the measuring errors made by the clamp. Equipped with calibration column, it can ensure absolute accuracy.

This instrument consists of rotary clamp, indicator, calibration column and vertical pillar.

The preforms with varying dia bottle openings were equipped with special rotary clamps and calibration column. Please provide the specifications of bottle openings when placing orders.

The rotary clamp can be customized and replaceable, so that the detection adaptability will be greatly upgraded for different specification performs.

The “CanNeed-GIT-100 Glass Bottle Impact Tester” is industry standard to test the impact resistance of various glass bottles. There are two ruler readings: impact energy and angle of pendulum bar.

The  CanNeed-ASS-100 Angle Swinging Shaker is used to shake up the samples,especailly for extraction testing.Put the sample into the conical flask,and clamp the conical flask,then set the time and frequency to start shaking.
The device adpot a 20mm reciprocating shaking way,which ensure the sample is fully mixed.

The “CanNeed-HWC-100 Hot Wire Bottle Cutter” offers an easy-to-use and cost-effective method for cutting containers for section weight analysis. It can cut PET bottle into several determined sections (The maximum is up to 5 sections). Then, the user can check whether each section accord with the corresponding weight standard. CanNeed-HWC-100 can quickly cut PET bottle with hot wires. Clear profiles can be obtained without PET deformation. PET bottle samples can be 200-3000 ml.

Prepares bottles for section weight analysis.
PET bottle samples of 200ml to 2,000ml are cut in 4 predetemined portions, Each bottle portion are checked to ensure that they comply to the exact weight assignment.

The CanNeed “CanNeed-MB-800 Auto Mashing Device” is the best choice for beer and malt Laboratory.

The device adpot a 20mm reciprocating shaking way,which ensure the sample is fully mixed.

The “CanNeed-ISD-3000 Piercing and Sampling Device” is for sampling from the bottled or canned products. Place the beverage onto the base, press down the handle and the piercing will be done. After extending the piercing needle into the bottom of samples, under the pressure from the CO2 outside, the liquid will flow into the measuring instrument.

The “CanNeed-GMT-100 Portable Beverage CO2 Meter” is common in breweries and soft drink industry to frequently measure the CO2 content during production. It enables a fast and accurate determination of the CO2 content in beer and carbonated drinks, either directly sampled within the production process (from e.g. tanks, pipes) of thereafter (from e.g. kegs). It only takes 3 minutes for one test, repetitive and durable.

Equipped with a manometer and a thermometer, the CO2 content can be quickly determined by CanNeed-GMT-100. Therefore, CanNeed-GMT-100 is widely applied in brewery and soft drink industries.

CanNeed-GMT-100 is designed to measure CO2 content based on Henry’s Law. When the sampling is finished, it will start electrolysis process automatically. The pressure can be read from the manometer and the temperature from the thermometer. By means of a slide rule, the CO2 content can be quickly determined.

The CanNeed-SDF-100 Sampling Device Filler is combined with CanNeed-FST-100 TPH Foam Stability tester.
CanNeed-SDF-100 Sampling Device Filler is used for taking large brewery cans and pipelines to take samples of wine in the beer manufactory, in order to avoid foaming, so that to measure the beer foam stability of sample cans in the laboratory.

CanNeed-BT-100 Bottle Turner is used for shaking up the bottled or canned samples. Set the shaking time, and clamp the samples into the clamp. After starting the equipment, the samples will be shaken and tumbled automatically until it reaches the set time.

Based on laser technology and automatic visual positioning technology, the CanNeed “LaserScore-300 Automatic EOE Score Residue and Progression Measure System” is used to inspect EOE score residue and rivet convex progression automatically. LaserScore-300 has 2 work positions, each position adapts to inspect 202, 206 and 209 EOE.

Put several EOE samples stacked in the position to be measured, when testing, the automatic sampling mechanical arm will send the sample to the inspection clamp, the servo system coordinate with the automatic visual positioning system, positioning the measuring point accurately, measuring the different points on EOE by turns, the automatic sampling mechanical arm will send the sample from the clamp back to the stacked position after inspection completely each time.

The application of LaserScore-300 realizes automatic measuring batch samples, save time, labor and material greatly.

Based on laser technology and software analysis, the “CanNeed-Laserscore-200 Score Residue Measure System” is a non-destructive system for measuring the residual score on Ends. It combines ease of use and reliability with excellent repeatability and accuracy. The end clamp is equipped in a 360°  rotary two-dimension linear guide working platform. It matches the ends, convenient to position and measure. 

Measure principle: The position of reflected light on the sensor changes corresponding to the change of
"the score depth”. Through inspecting this position change, it can measure the score depth of ends. The CanNeed-LaserScore-200 system uses two laser sensors, which are installed on the top side and underside of the can end – the reflect Laser beam to the sensors depending on the depth of the surface. The score depth and residue are calculated based on the calibration table and the actually performed measurement.

It takes about 5 seconds to do a measurement. It is simple to operate the laser measure software!

CanNeed-EPS-100 End Profile System is used to measure the end dimensions. It is with excellent performance by adopting precise optics measuring technology, measuring the end dimensions precisely.

The inaccuracy of end dimensions usually cause to such double seam defects as fault sealing, bearing cover and false sealing and so on. It is hard to measure the profile dimensions of ends without EPS-100.

EPS-100 takes the place of destruction measuring methods. The destruction measuring methods are not only inaccurate and time-consuming, but also get different results because of different operators. Adopting precise optics measuring technology, EPS-100 can measure all important parameters of ends.