|
| |
Product Classification : All Products
|
|
CanNeed-ALT-800 Leak Tester for Aerosol can
|
|
Canneed-ALT-600/ALT-800 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans. ALT-600 can test 6 cans at the same time, and ALT-800 can test 8. The permeability tester for aerosol cans blows up the cans up to a maximum of 10 bar and submerges them under water. At the leaking spots of the can then visible air-bubbles escape.
|
|
|
CanNeed-ALT-100 Leak Tester for Aerosol can
|
|
CanNeed-ALT-100 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans in a water bath. The can is freely suspended and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. Test pressure 8 - 10 bar. The test procedure is performed semi-automatically. The tester is suitable for all aerosol can diameters. The maximum can height is 300 mm.
|
|
|
CanNeed-F-125 Sterilization Temperature Monitor (F0 Value Monitor)
|
|
CanNeed-CAN-F-125 Sterilization Temperature Monitor (F0 Value Monitor) has been chosen by many beverage and canned food factories.
Applicable to different kinds of sterilization equipments and different place that require temperature monitoring: sterilization kettle (autoclave), Spray sterilization machine, Water sink sterilization machine, warehouse, transportation vehicles, etc.
Applicable to different kinds of products: canned food, beverage, beer, pouch food, jelly, etc.
Applicable to different kinds of packaging: metal cans, glass or PET bottles, pouches, plastic boxes, etc.
|
|
|
CanNeed-DER-400 Digital Enamel Rater
|
|
CanNeed-DER-400 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.
CanNeed-DER-400 is the industry standard. The new CanNeed Enamel Rater DER-400 instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and also different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
|
|
|
CanNeed-ABT-200 Burst Buckling Tester for aerosol cans
|
Aerosol can manufacturers need not only to save cost but also to ensure product quality, they are in a great need about devices which can accurately measure and assess the performance of the aerosol cans.
CanNeed-ABT-200 Burst Buckling Tester for Aerosol Cans is used for testing the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts.
|
|
|
CanNeed-CCAT-100 Can Comprehensive Abrasion Tester
|
|
Simple operation,no special skills. After well clamped the sample can,adjust testing pressure load,and set testing frequency and time, CanNeed-CCAT-100 will imitate the clashing of cans, wearing-resisting property can be evaluated by observing.
|
|
|
CanNeed-AXL-4000S Axial Load Tester
|
|
CanNeed-AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
|
|
|
CanNeed-PTT-400 Pop & Tear Tester
|
|
CanNeed PTT-400 Pop & Tear Tester was developed for testing different kinds of easy open ends. It can measure the Pop & Tear force, ring rotary force and ring detaching force.
Applicable to various types of ends, here to be shown 7 types: RP / SOT / EO / OVAL / FSE / SNAP and ALUFIX. It’s also suitable for sample ends from types of 113 to 603 (round ends). Oval or rectangular ends needs customized clamp for test. Oval ends diameter or longer length of rectangular should not be longer than 163 mm.
|
|
|
CanNeed-PTG-100 Digital Plate Thickness Gauge
|
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. Equipped with the Mitutoyo 0.001mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
CanNeed-DHG-300 Digital Can Height Gauge
|
The ‘CanNeed-DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
CanNeed-SST-3 Secure Seal Tester
|
|
CanNeed-SST-3 Secure Seal Tester is used to test the seal integrity on the glass or plastic containers and cans. The CND-SST-3 has been designed to address the special needs of sealing cans and bottles that use aluminium roll-on, twist crowns, or plastic caps. CanNeed-SST-3 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive and accurate readings.
|
|
|
CanNeed-TLT-200 Top Load Tester
|
|
CanNeed-TLT-200 Top Load Tester can measure the top load force, top load deformation, bottle body plane force and side force strength, the test result can be considered as the reference for product improvement and quality control. The tester is convenient operation and easy maintenance.
|
|
|
CanNeed-ATT-100 Automatic Torque Tester
|
|
CanNeed-ATT-100 automatic torque tester is used to realize controls of torques in laboratory or near the bottling line making total abstraction of the human factor during the measure. The operator only need to put down the sample on the machine and press the start button.
|
|
|
CanNeed-CSG-200S Countersink Gauge (with data output button)
|
|
The “CanNeed-CSG-200 Countersink Gauge (digital)” is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can).
|
|
|
CanNeed-CSRT-100 Coating Scratch Resistance Tester
|
|
Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.
|
|
|
CanNeed-BLT-100 Tumbling Tester for Crown Closures
|
|
The ‘CanNeed-BLT-100 Tumbling Tester for Crown Closures" is for evaluating the abrasion resistance of caps.
|
|
|
CanNeed-PPG-200 Preform Perpendicularity Gauge
|
|
The CanNeed-PPG-100 Preform Perpendicularity Gauge is used to test the perpendicularity of PET bottle.
It is the standard equipment for PET bottle industry and beverage industry.
Unlike other instruments, CanNeed-PPG-100 can effectively avoid the measuring errors made by the clamp. Equipped with calibration column, it can ensure absolute accuracy.
This instrument consists of rotary clamp, indicator, calibration column and vertical pillar.
The preforms with varying dia bottle openings were equipped with special rotary clamps and calibration column. Please provide the specifications of bottle openings when placing orders.
The rotary clamp can be customized and replaceable, so that the detection adaptability will be greatly upgraded for different specification performs.
|
|
|
CanNeed-VLT-100 Vertical Load Tester
|
|
CanNeed-VLT-100 Vertical Load Tester measures the vertical load strength of glass containers, simulating capping and stacking loads, which helps to reduce broken containers during capping and stacking.
|
|
|
CanNeed-GIT-100 Glass Bottle Impact Tester
|
|
The “CanNeed-GIT-100 Glass Bottle Impact Tester” is industry standard to test the impact resistance of various glass bottles. There are two ruler readings: impact energy and angle of pendulum bar.
|
|
|
CanNeed-ASS-100 Angle Swinging Shaker
|
|
The CanNeed-ASS-100 Angle Swinging Shaker is used to shake up the samples,especailly for extraction testing.Put the sample into the conical flask,and clamp the conical flask,then set the time and frequency to start shaking.
The device adpot a 20mm reciprocating shaking way,which ensure the sample is fully mixed.
|
|
|
CanNeed-BBTG-200 Bottle Bottom Thickness Gauge (digital)
|
|
CanNeed-BBTG-200Bottle Bottom Thickness Gauge (digital) is for measuring the bottom thickness of bottles, it is applicable for beer bottles or other similar bottles, Adopted the Mitutoyo digital indicator, resolution up to 0.01mm.
|
|
|
CanNeed-CPG-200 Canners Pressure Gauge
|
The “CanNeed-CPG-200Canners Pressure Gauge" is for measuring the inner pressure of the beverage or other containers.
Pierce into the sample with the piercing head of CanNeed-CPG-200, the seal component will form a temporary sealed condition, then the inner pressure of the sample will display on the pressure gauge. CanNeed-CPG-200 consisting of: Piercing holder; pressure gauge; Piercing head and seal component.
|
|
|
CanNeed-HWC-100 Hot Wire Bottle Cutter
|
|
The “CanNeed-HWC-100 Hot Wire Bottle Cutter” offers an easy-to-use and cost-effective method for cutting containers for section weight analysis. It can cut PET bottle into several determined sections (The maximum is up to 5 sections). Then, the user can check whether each section accord with the corresponding weight standard. CanNeed-HWC-100 can quickly cut PET bottle with hot wires. Clear profiles can be obtained without PET deformation. PET bottle samples can be 200-3000 ml.
Prepares bottles for section weight analysis.
PET bottle samples of 200ml to 2,000ml are cut in 4 predetemined portions, Each bottle portion are checked to ensure that they comply to the exact weight assignment.
|
|
|
CanNeed-SM-24 Electric Belt Drive Seamer
|
CanNeed-SM-24 Electric Belt Drive Seamer (Desktop model) enables the users to do more lab tests.
Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring. It is much more convenient for those lab tests, fast, easy and high efficiency.
|
|
|
SeamSight®-VSM-6A Automatic Seam Monitor
|
SeamSight-VSM-6A Automatic Seam Monitor is a compact measuring system for quick and accurate automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy.
SeamSight-VSM-6A Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
|
|
|
CanNeed-MB-800 Auto Mashing Device
|
|
The CanNeed “CanNeed-MB-800 Auto Mashing Device” is the best choice for beer and malt Laboratory.
|
|
|
CanNeed-PDO-100 Portable Dissolved Oxygen Meter
|
CanNeed-PDO-100 is designed for at-line and laboratory use in small and midsize breweries as well as in the beverage industry to provide excellent reliability in a rugged design, and purpose built to handle the environmental extremes encountered in everyday brewing operations.
Superior performance at an affordable price is achieved using the best in class optical DO sensor with built-in intelligence, making PDO-100 the brewer's best friend.
|
|
|
CanNeed-FGJ Manual Crown Sealing Machine
|
|
The CanNeed-FGJ Manual Crown Sealing Machine is a lab using manual crown sealing machine, it is applicable to various kinds of wine bottles and soft drink bottles.
|
|
|
CanNeed-MBCT-100 Malt Boiling Chroma Device
|
|
CanNeed-MBCT-100 Malt Boiling Chroma Device adopts digital temperature control with high accuracy of temperature control. The reflow device consists of four-group reflow device. And the whole machine is made of stainless steel, exquisite appearance and more durable. It is equipped with insulating layer and auto stirring device.
|
|
|
CanNeed-ASS-100 Angle Swinging Shaker
|
The CanNeed-ASS-100 Angle Swinging Shaker is used to shake up the samples,especailly for extraction testing.Put the sample into the conical flask,and clamp the conical flask,then set the time and frequency to start shaking.
The device adpot a 20mm reciprocating shaking way,which ensure the sample is fully mixed.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
