|
| |
Product Classification : All Products
|
|
CanNeed-CSRT-100 Coating Scratch Resistance Tester
|
|
Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.
|
|
|
CMT-200 Mobility / Lubricity Tester for Cans
|
|
The CanNeed “CMT-200 Mobility / Lubricity Tester for Cans” is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.
Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
|
|
|
CND-SST-3 Secure Seal Tester
|
|
The CanNeed “CND-SST-3 Secure Seal Tester” is used to test the seal integrity on the glass or plastic containers and cans. The CND-SST-3 has been designed to address the special needs of sealing cans and bottles that use aluminium roll-on, twist crowns, or plastic caps. The CND-SST-3 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive and accurate readings.
|
|
|
PCT-100 PET Bottle and Preform Cutter
|
The CanNeed “PCT-100 PET Bottle and Preform Cutter” is used to cut the bottle neck or preform neck
for further sealing integrity analysis.
|
|
|
DO-100 Dissolved Oxygen Meter (on-line)
|
|
The CanNeed “DO-100 Dissolved Oxygen Meter(on-line)” is used to monitor O2 content in liquid and gas on line.Adopt high accuracy optical probe,which not only makes high accuracy test and fast response,also there is no need to change diaphragm and electrolyte that reduce a lot of maintaining and running cost.
|
|
|
CND-SST-300 Secure Seal Tester (3 stations)
|
|
The “CND-SST-300 Secure Seal Tester “is used to test seal integrity on the glass or plastic containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
|
|
|
CanNeed-TT-200 Torque Tester
|
Applications: Food-industry / Cosmetic/ Pharmaceutical / Chemical / Metrology
CanNeed-TT-200 Torque Tester is a professional equipment which is used to test the caps’ “capping torque”and “songaila torsion “for bottled products.It is industry standard with excellent performance.Users can option software.
|
|
|
CanNeed-BBTG-200 Bottle Bottom Thickness Gauge (digital)
|
BBTG-200 Bottle Bottom Thickness Gauge (digital) is for measuring the bottom thickness of bottles, it is applicable for beer bottles or other similar bottles.
Adopted the Mitutoyo digital indicator, resolution up to 0.01mm.
|
|
|
CanNeed-PU-2000 Pasteurization Temperature Monitor (PU Monitor)
|
The Canneed PU-2000 can be used to measure the temperature while the beer is in the pasteurization process bottles or cans, calculate the PU units (PU value), and the temperature curve can be shown by computer display or printed via a printer.
It is made of stainless steel, equipped with the waterproof design and the capacitance induction button in order to make a simple operation, easy maintenance and ensured the low maintenance workload.
|
|
|
CODG Cap External Diameter Gauge
|
The “CODG Cap External Diameter Gauge”is used to test the out diamter of the crown caps to see if the gland is qualified or not.
|
|
|
CanNeed-CAN-1050D Digital Can Closing Force Gauge
|
|
CanNeed-CAN-1050D Can Closing Force Gauge is for measuring the force of seaming head of the seaming machine. By using CanNeed-CAN-1050d, producers can avoid product defects caused by over plating: sharp edge, seam breakage, body deformation, body hook overlength, over large countersink and so on. In the meantime, producers can also avoid product defects caused by too small pallet lift force: slippery cans, too short hook and so on.
|
|
|
CSS-1000 Anti-noise Seam Saw
|
|
CanNeed “CSS-1000 Anti-noise Seam Saw” is provided with an anti-noise design and a special guide
for 2-and 3-piece cans with 65mm dia, such as beer cans and 209 cans. The cutting process is so precise, quick, safe and convenient to ensure precise cutting effects without distorting the cans. The seam image on Canneed series Seam Sight TM automatic seam measuring systems gets thereby every clear and improves measurement speed and reliability.
|
|
|
VSM 6A+ Automatic Seam Monitor
|
The VSM 6A+ Automatic Seam Monitor is a compact measuring system for quick and accurate
automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy.
The VSM 6A+ Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
|
|
|
CTG-HP Hover Probe
|
|
The CanNeed CTG-HP Hover Probe is combined with CTG-300/CTG-310 Coating Thickness Gauge to test the lacquer film coating thickness and weight per unit area.
|
|
|
CanNeed-VLT-100 Vertical Load Tester
|
|
CanNeed-VLT-100 Vertical Load Tester measures the vertical load strength of glass containers, simulating capping and stacking loads, which helps to reduce broken containers during capping and stacking.
|
|
|
Seam-X-On-line X-Ray Automatic Seam Scanner(Non-destructive)
|
|
The CanNeed “Seam-X-On-Line X-Ray Automatic Seam Scanner” adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It’s applicable for online in producing department. It’s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
|
|
|
Seam-X-On-line X-Ray Automatic Seam Scanner(Non-destructive)
|
|
The CanNeed “Seam-X-On-Line X-Ray Automatic Seam Scanner” adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It’s applicable for online in producing department. It’s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
Advantages:
01)Non-destructive measurement, avoid wasting samples
02)Non-destructive measurement, avoid environmental pollution and save handling charges
03)High sampling frequency, reduce the isolation inferior
04)High sampling frequency, cost saving
05)Can track the chucks corresponding to the unqualified products
06)360-degree fully scan measurement
07)Can be suitable for various types of cans
08)Higher accuracy
09)Avoid manual measurement error
10)Durable
11)Accord with the worldwide safety standards
|
|
|
CanNeed-ASST-100 Automatic Secure Seal Tester
|
|
CanNeed-ASST-1000 Automatic Secure Seal Tester is used to test the seal integrity after packaging. By detecting gas leakage, it effectively controls the seal integrity after packaging. It is used to test PET bottles, glass bottles and cans, also can be used to test crown caps and caps of PET bottles. It effectively controls the sealing propertyand prevent gas leakage, therefore it is widely used in beverage industry. Place the sample into water and take pressure charge, then observe if there is gas leakage to judge the seal integrity.
|
|
|
CanNeed-AAXL-2000 Automatic Axial Load Tester
|
CanNeed-AAXL-2000 is a full automatic can axial load measure system with unattended operation. It can measure the axial load of the 2-piece can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.
CanNeed-AAXL-2000 is equipped with auto sampling device which conveys the can to the test area automatically. Intelligent mechanical arm puts the can on the test station and the top tray falls to reach the sample. When the force exceeds the can load limit, can deforms. Test curve will be showed on the screen. Mechanical arm will take the sample out after test. It is suitable for cans with different diameters of can mouth. Test result is saved in database and is sent to SPC system automatically.
|
|
|
CanNeed-ACBT-1000 Automatic Buckle Tester Bottom for Can
|
CanNeed-ACBT-1000 Automatic Buckle Tester is a full automatic buckle tester bottom for cans with unattended operation.It determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses with dome growth function. CanNeed-ACBT-1000 is a standard instrument for can-making industry which can respectively and efficiently finish auto online measurement.
CanNeed-ACBT-1000 is equipped with auto sampling device which conveys the can to the testing area automatically. Swinging mechanical hand pushes the can to the testing station and it will measure automatically. There is no need to change the clamps, applicable for empty necked-in cans and straight wall cans at the same time. There is no need to change the clamps, applicable to test the cans with different diameters and different heights at the same time. Testing results can be saved in database and automatically transferred to SPC system.
|
|
|
CanNeed-AFMS-2000 Automatic Can Measure Desk for Front Stations
|
CanNeed-AFMS-2000 is a full automatic front end measure system with unattended operation. It can measure the wall thickness of upper and middle parts of the can, bottom depth and height of the can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.
AFMS-2000 is equipped with auto sampling device which conveys the cans to the test area automatically. Swinging mechanical hand pushes the can to the test station then three-jaw centering mechanism locates the can quickly. Swinging device rotates the can to a defined angle to get various testing point. Test result is saved in database and is sent to SPC system automatically.
|
|
|
CanNeed-ATT-Line-1000 Automatic Torque Tester （Automatic Sampling）
|
CanNeed-ATT-Line-1000 Automatic Torque Tester is the ideal instrument to do this test. It can be placed maximum 12 samples, then automatically sampling by conveyor belt. The sample will be measured automatically once arrived at the measurement station and avoid the influence of human factors.
|
|
|
CanNeed-ADER-C6000 Automatic Digital Enamel Rater for Cans
|
|
CanNeed-ADER-C6000 is a fully automatic digital enamel rater with unattended operation. It’s is used to measure the coverage, the compactness and the electric current value of the enamel coating inside the beverage cans. The contents will erode the metallic material and affect the quality and storage of products if the enamel coating inside the cans is not integrated.
The machine adopted fully automatic inspecting technology, more efficient and more effectively reducing the human errors. It is the standard for evaluating can quality in can-making industry.
|
|
|
CanNeed-CND-TT-200E Digital Torque Tester
|
|
Applications: Food-industry / Cosmetic/ Pharmaceutical / Chemical / Metrology
The CanNeed-TT-200-E Digital Torque Tester are specially designed for testing the cap closing and opening torque value of the bottled products. Its excellent performance makes it the industrial standard.
The clients can also choose the measuring software by order.
|
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge is used to measure the coating thickness in real time, save time and improve the quality of the product. Non-contact optical measurement technology is applied to product development, laboratory quality control and online production control. In the solar energy industry, optical coating industry, food packaging,as well metal packaging, are very good choice to improve the surface quality of products: appearance, adhesion, corrosion resistance, abrasion resistance, scratch resistance.
|
|
|
CanNeed-AHWC-100 Automatic Hot Wire Bottle Cutter
|
|
CanNeed-AHWC-100 Automatic Hot Wire Bottle Cutter offers an easy-to-use and cost-effective method for cutting containers for section weight analysis. It can cut PET bottle into several determined sections(The maximum is up to 5 sections). Then, the user can check whether each section accord with the corresponding weight standard. CanNeed-AHWC-100 can quickly cut PET bottle with hot wires. Clear profiles can be obtained without PET deformation. PET bottle samples can be 200-3000 ml.
|
|
|
CanNeed-PCT-100 PET Bottle and Preform Cutter
|
|
The CanNeed-PCT-100 PET Bottle and Preform Cutter is used to cut the bottle neck or preform neck for further sealing integrity Analysis.
|
|
|
CanNeed-GNG-100 “Go-no-Go” Gauge
|
|
CanNeed-GNG-100 “Go-no-Go” Gauge
Quality control gauges for checking the threaded tops of glass and plastic containers. It checks the threads, outside diameter, spacing, etc.
Comb. Finish Gauge 28mm-PCO-1816 PET
Comb. Finish Gauge 28mm Pet/28-969-1716
Comb. Finish Gauge 38mm Glss/38-1663
Comb. Finish Gauge 38mm Pet/38-1690
Comb. Finish Gauge 28mm Glass/28-1650RE
Comb. Finish Gauge 28mm-PCO-1810 PET
Comb. Finish Gauge 28BPF
|
|
|
CanNeed-TDE-100 Sterilization Thermograph (Can FO Value Tester)
|
|
CanNeed-TDE-100 Sterilization Thermograph (Can FO Value Tester) Suitable for all kinds of sterilization apparatus and occasions for recording temperature: retorts, spray sterilizing machines, sink type sterilizer, warehouse and trucks.
The user properly connects CanNeed-TDE-100-C** Sterilization Thermograph with the test samples, and places them together in the sterilizing equipment for sterilization. CanNeed-TDE-100-C** will record the temperature curve during the whole process of the sterilization. When the sterilization ends, the thermograph will be put on CanNeed-TDET-100 “Electromagnetic Induction” Data Transmitter and the temperature data will be output to the computer. With the assistance of the software, the temperature data and curve can be read, analyzed, saved and printed.
|
|
|
CanNeed-SFAT-100 Static Friction Angle Tester (Tilt Table)
|
|
CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.
Three containers are placed on the table in a pyramidal configuration. After the start button is pushed, an electric motor increases the angle of inclination of the table. The bottom two containers are constrained and do not move during testing. When the tilt angle becomes great enough to overcome the frictional forces between the containers, the top container begins to slide and will contact the trip bar, which stops the drive motor and simultaneously applies a brake to the inclined table. This prevents coasting and inadvertent measurements of erroneously high tilt angles.
Applicable for: glass bottles, plastic bottles, aluminum bottles and cans, etc.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
